Hydraulic ramps for the factory-made van (van) of the vehicle, can be installed internally (inside the vehicle) or externally (at the rear end of the chassis or on the side of the vehicle). Depending on the chassis on which the ramp is mounted, there are types with one lifting arm ramp, suitable for rear-mounted or side-wraparound doors for passenger and van cars, or types with linear two arm (two arms) lifting. Compared with the 1-arm model, the reinforced construction with 2 lifting arms (two arms) provides additional lift capacity and maximum platform stability. Increases stability of platform load and operator security. Of course, these lifts can be mounted inside the van itself or from the outside, to the rear of the vehicle. Also, there is a half ramp that covers only the left or only the right side of the rear end of the vehicle.
Range of the carrying capacity of the ramp is between 150 and 1500 kg.